DAD4840, DAD4940, DAD4841, DAD4941 - surface mounted, AP
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
Downdraft extractor system in elegant matt black design and with intuitive SmartControl operation
DAD4840, DAD4940, DAD4841, DAD4941 - surface mounted, AP
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940, flush, Installation drawings
1) Cut-out for exhaust air duct in the cabinet base., 2) Ensure sufficient stability of the worktop., 3) Step milling for flush mounting in a worktop. Note the, the different milling widths for the hob and the downdraft. , Instead of a step milling, a 5.5 mm downwardly offset wooden strip can be installed (not included in the scope of delivery)., , Exhaust air connection ø 150 mm.
DAD4840, DAD4940 - DUP150, Installation version 1, Installation drawings
DAD4840, DAD4940, overlying, Installation drawings
1) Cut-out for exhaust air duct in the cabinet base., 2) Ensure sufficient stability of the worktop.
DAD4840, DAD4940 - DUU600 Plinth box, Installation version 2, Installation drawings
DAD4840, DAD4940, overlying, Installation drawings
1) Cut-out for exhaust air duct in the cabinet base., 2) Ensure sufficient stability of the worktop.
DAD4840, DAD4940, overlying - AP600 mm, Side view, Installation drawings
① Only required when flat ducting is laid under cabinets or the DUU 600 recirculation box is used., ② Exhaust duct Ø 150 mm.
DAD4840, DAD4940 - flush - side view - Installation drawings
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940 - DUP150, Installation version 1, Installation drawings
DAD4840, DAD4940, DAD4841, DAD4941 - surface mounted, AP
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940, flush, Installation drawings
1) Cut-out for exhaust air duct in the cabinet base., 2) Ensure sufficient stability of the worktop., 3) Step milling for flush mounting in a worktop. Note the, the different milling widths for the hob and the downdraft. Instead of a, Instead of a step milling, a 5.5 mm downwardly offset wooden strip can be, can be installed (not included in the scope of delivery)., , Exhaust air connection ø 150 mm.
DAD4840, DAD4940, flush - AP600 mm, Side view, Installation drawings
① Only required when flat ducting is laid under cabinets or the DUU 600 recirculation box is used., ② Exhaust duct Ø 150 mm.
DAD484x, DAD494x, flush AP
① Exhaust duct Ø 150 mm.
DAD4840, DAD4940 - DMK150-1 wall box, Installation version 3, Installation drawings
① DFK-AK 90, ② DFK-R 1000, ③ DFK-BH 45, ④ DFK-A, ⑤ DMK 150-1
DAD4840, DAD4940 - surface mounted - side view - Installation drawings
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940 - DUP150, Installation version 1, Installation drawings
① DUP 150
DAD4840, DAD4940 - DMK150-1 wall box, Installation version 3, Installation drawings
DAD4840, DAD4940, DAD4841, DAD4941 - flush - side view - Installation drawings
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940, Installation drawings
DAD4840, DAD4940, DAD4841, DAD4941 - flush - side view - Installation drawings
① Only required if flat ducts are laid under the cabinets or the DUU 600 recirculation box is used., ② Exhaust air connection Ø 150 millimetres.
DAD4840, DAD4940 - DUP150, Installation version 1, Installation drawings
① DUP 150
DAD4840, DAD4940 - DUU 600 Plinth box, Installation version 2, Installation drawings
① DFK-AK 90, ② DFK-R 1000, ③ DFK-BH-45, ④ DUU 600
DAD4940, Installation drawings
1. Stepped cutout for flush-fit installation in stone worktops (granite, marble)., 2. Ensure that materials are sufficiently stable., 3. Cut-out off-centre., Exhaust duct Ø 150 mm., * Only required when flat ducting is laid under cabinets or the DUU 600 recirculation box is used.